medical eto gas sterilizer is suitable for Medical Supplies: Syringe, Infusion Set, Surgical Gloves, all kinds of Rubber Infusion Catheter, Oxygen devices, Suture, Anesthesia supplies Sanitary napkins, Medical dressing. Optical endoscopic, Pacemakers, In stent, Surgical instruments, patient's...Send Inquiry
medical eto gas sterilizer is suitable for Medical Supplies:
Syringe, Infusion Set, Surgical Gloves, all kinds of Rubber Infusion Catheter, Oxygen devices, Suture, Anesthesia
supplies Sanitary napkins, Medical dressing.
Optical endoscopic, Pacemakers, In stent, Surgical instruments, patient's bedding, etc.
1. 1m3 to 100 m3 chamber available.
2. Semi Automatic and Fully Automatic (PLC based) models available.
★ EN ISO 13485 TUV
★ DIN EN 1422
★ EN ISO 11135
Selection sealing door
door sealing way: air feeded inside.
Selection control system cabinet
The dedicated programmable microcomputer control system can control temperature, pressure,humidity and time, do timing residual gas treatment, alert, print real-time data by micro-printer.Support storage and export sterilization process data.
|Features of sterilizer|
1 heating method is hot water circulation, hexahedron heating, to ensure uniform temperature in the sterilization chamber and accuracy of temperature control.
2 During the heat preservation process, when the temperature in the water tank is lower than the temperature set value, the heating system automatically starts to compensate the temperature.
3 does not damage the disinfected items. Sterilization and sterilization with this sterilizer basically guarantee the original traits of the articles.
4 This equipment is equipped with an air filter device. When the air is replaced after sterilization, the filtered air is used to enter the sterilizer chamber to prevent dust from the outside air from entering the sterilization chamber.
5 This equipment is equipped with a gasification unit with EO temperature control to ensure that the ethylene oxide changes from liquid to vapor into the sterilization chamber.
6This equipment is equipped with an exhaust gas neutralization system to neutralize residual ethylene oxide and reduce environmental pollution.
7 This equipment is an intermittent work system.
We are the first manufacturer in China to produce ethylene oxide sterilizers. Founded in 1986, we have 30 years of equipment manufacturing experience;
2，The stainless steel material used in our sterilizer liners is a pressure vessel plate, which is a high standard stainless steel plate in stainless steel;
4，The G-series and H-series products can provide free on-site 3D design services to make the equipment's pre-preparation, installation and post-service more efficient;